• Building 3 Shunheli Industrial Park,
  • Lunjiao Shunde Foshan City Guandong China.
  • Working Hours
  • Mon – Sat Day: 09.00 To 18.00
Find Advisor
wehomachinery
Woodworking Machinery|Woodworking mortise and tenon machine

Woodworking Machinery|Woodworking mortise and tenon machine
26 Jan 2022

It is widely used in new Chinese furniture, antique furniture and classical furniture. For example, various complex structures such as mortise mortise tenon, grid shoulder tenon, hand mortise tenon, mortise tenon, etc. all require woodworking mortise and tenon machines to complete. CNC equipment is second to none in terms of efficiency and processing quality. Today, let's talk about the machine for processing te
Maintenance of woodworking machinery

Maintenance of woodworking machinery
24 Jan 2022

(1) Maintenance of transmission parts and hydraulic system. 1) The flat belt should pay attention to whether the joint is correct and firm. V-belt should pay attention to choose the appropriate model and specification. The belt tension should be moderate, not too tight or too loose. 2) The belt and pulley should be kept clean frequently 3) Keep the belt dry and prevent the belt from slipping when wet. When the fla
The process of forming wood products

The process of forming wood products
12 Jan 2022

Irregular Wood Products Coating Machine Through manual or various processing equipment to directly change the shape of wood raw materials. size. form or nature. Then it is processed into a combination of a series of work of wood products that meet the technical requirements. A process called wood product forming. The process of forming wood products generally includes ingredients. Manual or mechanical processing of
The practice of wood clamp | Wood Sheet Clamp Carrier

The practice of wood clamp | Wood Sheet Clamp Carrier
03 Dec 2021

Material tools: 3mm thick balsa wood strips, utility knife, pencil, ruler, scissors, dental floss, flower pot with protruding edge at the opening, spray paint can, super glue or white glue. step: 1. Measure the size of the flowerpot to determine the size of the bracket we want to make. Spray the color you like on the flowerpot and let it sit to dry. 2. Each bracket needs 8 small wooden slats, the length is equal
Trouble with the wood saw | Wood Panel Saw

Trouble with the wood saw | Wood Panel Saw
03 Dec 2021

1. When the wood saw is refueling and stalling, working less vigorously, and the heating machine is overheated, it is generally a filter problem. Therefore, the filter should be inspected before work. A clean and qualified filter should be pointed at the sun to observe it. It should be thorough and bright. Otherwise, it is unqualified. When the filter of the chain saw is not clean enough, it should be washed with hot
Common failure causes of Wood Round Rod Making Machine and how to eliminate them

Common failure causes of Wood Round Rod Making Machine and how to eliminate them
03 Dec 2021

In the production process of charcoal rod making machine, the use of rod making machine directly affects the quality of machine-made charcoal, so the safe and efficient use of charcoal rod making machine is the primary condition. Mechanisms’ common postings and solutions for charcoal machine equipment: 1. The reason why the power indicator of the console is not bright: a. Connect the power supply of the mecha
Incorrect turning pitch and its solution | Wood Turning Machine

Incorrect turning pitch and its solution | Wood Turning Machine
03 Dec 2021

Fault analysis: the thread is incorrect in full length or partly, the pitch is uneven on the full length of the thread, or the slub pattern appears on the thread. Solution: 1. The overall length of the thread is incorrect: the reason is improper matching of the change wheel or the wrong position of the feed box handle. You can recheck the position of the feed box handle or check the hanging wheel. 2. Partially incorr
The use and characteristics of the direct supply of the double-head saw cutting machine | Automatic Double End Saw

The use and characteristics of the direct supply of the double-head saw cutting machine | Automatic Double End Saw
17 Nov 2021

The use and characteristics of the direct supply of the double-head saw cutting machine: The key to the CNC lathe consists of a protective cover, a material pressing device, a feeding device, a tool spindle power head, a cutting device, a fully automatic oil injection water cooling and moisturizing device, a sound card rack, a support rack, a pneumatic system, and household appliances system software, etc. The key pa
What is the reason why the saw beam does not rise when the band saw machine is cutting？ | Industrial Beam Saw

What is the reason why the saw beam does not rise when the band saw machine is cutting？ | Industrial Beam Saw
17 Nov 2021

1. First check if the bottom dead point contact switch is in good condition; 2. Whether the hydraulic oil tank is short of oil (after the hydraulic pump enters the air, it will cause damage to the oil pump or fail to reach the working hydraulic pressure); 3. Check whether the hydraulic oil pump is in good condition (the hydraulic pump of the sawing machine that has been used for a long time may not reach the hydrauli