The main advantages of the edgebander are firm, fast, lightweight, and fast. The edge banding quality of the edgebander is affected by many factors, including equipment conditions, operating proficiency, and raw material conditions. Generally, pay attention to the following aspects:

1. The moisture content of wood. Generally speaking, the processed wood boards are required to be kept dry. If the water content is high, it will not only affect the efficiency of processing, but also affect the quality of the product.

2. Choose the quality of the glue. The working speed of the edgebander is fast. If the effect of the glue is not good, it will undoubtedly be a very big interference to the quality of its work. Therefore, the edgebander is required to have good initial adhesion and firm bonding.

3. The amount of glue applied to the hot-melt edgebander should be based on the extruded glue on the outer side, otherwise it will affect the appearance.

4. During processing, there are higher requirements for indoor temperature. Generally speaking, it should reach 15 degrees or more. This is because the edgebander has certain requirements for the flexibility of the edge banding, and the temperature is the main influencing factor.

5. The quality of edge banding also has a greater impact on the effect of edge banding.

The above five points are the factors that affect the effect of the edgebander.